Kapci 380 Aluminium PE Putty

Product description
Kapci 380 is 2K polyester-based putty which contains fine aluminium flakes providing increased film
thickness and resistance to vibrations. It can be used over bare steel, galvanized steel, aluminium and glass
fibre reinforced plastic (GRP) for filling of irregularities and cavities.
Substrates
Kapci 380 Aluminum PE Putty can be applied over variety of substrates such as bare metal, galvanized
original car panels, aluminium, glass fibre reinforced plastic (GRP), and properly sanded and prepared old
finishes in sound conditions. Prior to applying Kapci 380 Aluminium PE Putty, the surface should be clean
and degreased. For degreasing and cleaning of sanding dust it is recommended to use Kapci 605 Degreaser.

Drying time at 20°C:
Dry to sand: 20-30 min
The drying time and pot life of PE Putty mixed with the putty hardener will considerably
depend on temperature and the amount of the hardener used.
At lower temperature add 2-3 % of the hardener, at higher temperature add 1%.
Machine dry sanding:
The following grades of sanding papers and steps are recommended:
P80-P120 and finish with P180
Manual dry sanding:
The following grades of sanding papers and steps are recommended:
P80-P120 and finish with P180
IR Drying:
Short wave*: 5-8 min
*Guideline for short wave IR equipment. Refer to the IR equipment manufacturer’s
instruction for sets-up