Kapci 365 Mixed Fiber PE Putty

Product description
Kapci 365 is a polyester-based putty which contains glass fibers to provide thicker layers when used in
standard filling operations and for filling of deeper dents.
Substrates
Kapci 365 Mixed Fiber PE Putty can be applied over variety of metal surfaces such as bare steel, galvanized
steel, aluminium, and glass fibre reinforced plastic. Prior to applying Kapci 365 the surface should be clean
and degreased. For degreasing and cleaning of sanding dust it is recommended to use Kapci 605 Degreaser.

Drying time at 20°C:
Dry to sand: approximately 30 min
The drying time and pot life of PE Putty mixed with the putty hardener will considerably depend
on temperature and the amount of the hardener used.
–
Machine dry sanding:
The following grades of sanding papers and steps are recommended:
P80-P120 and finish with P180
Manual dry sanding:
The following grades of sanding papers and steps are recommended:
P80-P120 and finish with P180
IR Drying:
Short wave*: 5-8 min
*Guideline for short wave IR equipment. Refer to the IR equipment manufacturer’s instruction
for sets-up