8350 2K HS High Build Fast Drying Filler VOC Compliant

Product description
Prima 8350 is fast drying 2K HS acrylic filler developed for use under waterborne basecoats, solventbased basecoats, and 2K acrylic topcoats.
 It delivers fast drying combined with good application,
 Good leveling and sanding properties.
 Good colors hold out.
Substrates
Prima 8350 can be applied over
 2K PE putties.
 2K Epoxy Primers.
 2K Wash primers.
 1K Etch Primers.
 Original factory primers.
 Glass fibre reinforced plastic (GRP).
 Well sanded old finishes in solid condition.
 To reach optimum performances, the surface should be properly sanded, cleaned, and degreased with
Prima 8080 Degreaser.

Mixing ratio by volume:
100:25:10-20%
(4:1:10-20%)

Choice of hardeners
The recommendations below to meet every application condition:
 Prima 8500 Extra Fast hardener is used for partial repair at temperature up to 20°C.
 Prima 8530 Fast hardener is used for partial repair at temperature up to 25°C.
 Prima 8550 Normal hardener is suitable for partial repair for temperatures up to 30°C.
 Prima 8570 Slow hardener is recommended for partial repair when temperature is above 30°C.
Other tips
 Do not apply Prima 8350 filler for spot repair over TPA (thermoplastic acrylic paint) and old 1K
finishes. Apply to complete panels only.
 For optimum application, ensure that both spray booth temperature and paint temperature are
between 20C and 25C
 Clean the spray gun thoroughly immediately after use of 2K products.