High solids 2K acrylic primer 5:1 with excellent filling properties. Can be
used instead of gun putty, ensuring savings in repair time and material consumption. Can reach 300 microns thickness in three coats. Suitable for dry and wet sanding by hand or with a sander. VOC compliant.
2K primer-surfacer with extremely high filling properties with good sanding
behavior. Very good adhesion and anticorrosive properties. Can be used
instead of sprayable putty.
Substrates Fiberglass, old paints, body fillers, bare metal on small areas.
Surface Preparation In case of application over bodyfillers/putties dry sand the surface with
P180-P240. Clean and degrease thoroughly. Use tack cloth for heavy dust.
Application Conditions 10-25°C
Drying 30-45 min. at 60°C
5-6 hours at 20°C
Sanding Sand Dry P320-P500 or wet P600-P800
Критики
Нема критики сеуште.