Kapci 360 Polyfiber PE Putty

Product description
Kapci 360 is a polyester-based putty which contains glass fibers. Its higher number of glass-fibers
provides thick layers in filling of deeper dents, small holes and bridging of cracks.
Substrates
Kapci 360 Polyfiber PE Putty can be applied over variety of metal surfaces such as bare steel, galvanized
steel, aluminium, and glass fibre reinforced plastic. Prior to applying Kapci 360 the surface should be
clean and degreased. For degreasing and cleaning of sanding dust it is recommended to use Kapci 605
Degreaser.

Drying time at 20°C:
Dry to sand: approximately 50 min
The drying time and pot life of PE Putty mixed with the putty hardener will considerably
depend on temperature and the amount of the hardener used.
“At lower temperature add 2-3 % of the hardener, at higher temperature add 1%.”
Machine dry sanding:
The following grades of sanding papers and steps are recommended:
P80-P120 and finish with P180
Manual dry sanding:
The following grades of sanding papers and steps are recommended:
P80-P120 and finish with P180
IR Drying:
Short wave*: 5-8 min
*Guideline for short wave IR equipment. Refer to the IR equipment manufacturer’s instruction
for sets-up.