Kapci 355 Elastic PE Putty for Plastic -BLACK

Product description
Kapci 355 is a polyester-based elastic putty especially designed for application over plastics. It adheres
excellent to plastics, has excellent flexibility and resistance to wrapping. It can be applied over any kind
of plastics except polyethylene (PE) and may be used under any Kapci filler. Its gray anthracite color is
similar to the original color of plastic car parts.
Substrates
Kapci 355 Elastic PE Putty can be applied over variety of plastic substrates except polyethylene (PE). Prior
to applying Kapci 355 the surface should be clean and degreased. For degreasing and cleaning of sanding
dust it is recommended to use Kapci 605 Degreaser.

Drying time at 20°C:
Dry to sand: 20-30 min
The drying time and pot life of PE Putty mixed with the putty hardener will
considerably depend on temperature and the amount of the hardener used.
“At lower temperature add 2-3 % of the hardener, at higher temperature add 1%.”
Machine dry sanding:
The following grades of sanding papers and steps are recommended:
P80-P120 and finish with P180
Manual dry sanding:
The following grades of sanding papers and steps are recommended:
P80-P120 and finish with P180